Another effort to get my wifi modem working on Linux Mint XFCE
From the reading that I have done it seems like the fixes are for Debian, or Linux Mint LMDE (which is based on Debian as opposed to the "normal" one that is based on Ubuntu)
So, I'll load LMDE or Debian and see how I go with that.
This is what I tried...
http://community.linuxmint.com/tutorial/view/379
This tutorial is applicable to LinuxMint Debian Edition for it doesn't come with the Hardware Driver option (System->Administration->Hardware Drivers) found
in Ubuntu and LinuxMint. Installing LMDE will not automatically install
the driver for you so you have to manually do it from the Terminal.
Steps are outlined below:
You are required to connect to the Internet with the LAN interface before proceeding.
1.) After successfully installing LMDE, you have to update it first prior to installing the driver.
sudo apt-get update && sudo apt-get upgrade
2.) After a successfull update, we can now install the desired driver for our Broadcom wireless card:
sudo apt-get install b43-fwcutter firmware-b43-installer
All you have to do is wait for the installation to finish and you will be able to use the Broadcom wifi card.
[March 19, 2011]
Here's an update if you're trying to install the driver on a netbook with low-power b43 chipset:
sudo apt-get install b43-fwcutter firmware-b43-lpphy-installer
Saturday, 3 May 2014
Monday, 28 April 2014
WiFi on my HP Pavilion laptop #2
Now I'm going to try this way:
http://community.linuxmint.com/tutorial/view/1115
Although I don't know what the other attempt has done.
I unchecked them in the start/settings/software sources > additional repositories tab, updated cache and it said I have some broken packages.. ah well..
he most simple method to install broadcom b43 wireless driver in LMDE
In the start/settings/driver manager, the
Broadcom Corporation: BCM4313 802.11b/g/n Wireless LAN controller.
bcmwl-kernel-source (Version 6.3.0.223.141+bdcom-0ubuntu1. Broadcom 802.11 Limux STA wireless driver source
Is not active - tried to activate it and it didn't, it went back to:
Do Not use the device
It changes back when I click the click the "apply changes" button.
I'm running Linux Mint 14 Nadia. My wireless card is the BCM4331 on a Mac Mini (Macmini5,1). After installing this package I rebooted then I added a line that said simply "b43" to the file /etc/modules. Rebooted again. Clicked on the Wifi icon in the panel in the notification area and chose my Wifi network. Success!
Try this and re-boot.
Didn't seem to work. I might have to do some reading and learn about what is really going on rather than try trying stuff.
http://community.linuxmint.com/tutorial/view/1115
Although I don't know what the other attempt has done.
I unchecked them in the start/settings/software sources > additional repositories tab, updated cache and it said I have some broken packages.. ah well..
he most simple method to install broadcom b43 wireless driver in LMDE
This method applies to kernels 3.5 and above and depends upon replacing
Debian firmware-linux-nonfree with Ubuntu
linux-firmware-nonfree_1.14_all.deb. Follow these steps:
1- Start by uninstalling firmware-linux-nonfree via Synaptic
2- Download Ubuntu linux-firmware-nonfree_1.14_all.deb by another
machine with internet connection or by connecting your machine via wired
connection or using another USB wireless.
The download link is http://www.ubuntuupdates.org/package/core/quantal/multiverse/base/linux-firmware-nonfree
3- Install the downloaded driver via Gdebi or dpkg as follows
dpkg -i linux-firmware-nonfree_1.14_all.deb
4- Reboot your machine and that is all
Downloaded the file "linux-firmware-nonfree_1.14_all.deb" to Downloads folder
from Downloads folder:
dpkg -i linux-firmware-nonfree_1.14_all.deb
Selecting previously unselected package linux-firmware-nonfree.
(Reading database ... 146266 files and directories currently installed.)
Unpacking linux-firmware-nonfree (from linux-firmware-nonfree_1.14_all.deb) ...
Setting up linux-firmware-nonfree (1.14) ...
(Reading database ... 146266 files and directories currently installed.)
Unpacking linux-firmware-nonfree (from linux-firmware-nonfree_1.14_all.deb) ...
Setting up linux-firmware-nonfree (1.14) ...
Now for a reboot and see what happens...
In the start/settings/driver manager, the
Broadcom Corporation: BCM4313 802.11b/g/n Wireless LAN controller.
bcmwl-kernel-source (Version 6.3.0.223.141+bdcom-0ubuntu1. Broadcom 802.11 Limux STA wireless driver source
Is not active - tried to activate it and it didn't, it went back to:
Do Not use the device
It changes back when I click the click the "apply changes" button.
I'm running Linux Mint 14 Nadia. My wireless card is the BCM4331 on a Mac Mini (Macmini5,1). After installing this package I rebooted then I added a line that said simply "b43" to the file /etc/modules. Rebooted again. Clicked on the Wifi icon in the panel in the notification area and chose my Wifi network. Success!
Try this and re-boot.
Didn't seem to work. I might have to do some reading and learn about what is really going on rather than try trying stuff.
WiFi on my HP Pavilion laptop #1
I installed Linux Mint 16 XFCE 64 bit on my HP Pavilion DM1 laptop.
It all works OK except for the WiFi which at first was low in signal and would not accept my network password. Then it didn't work at all because the interface had been disabled.
A quick google revealed that it's a common problem with the broadcom driver.
Trial fix #1 was to install a package from the Debian repository and compile it.
I added two repositiries to the file /etc/apt/sources.list
first:
deb http://ftp.us.debian.org/debian testing main contrib non-free
and then:
deb http://ftp.au.debian.org/debian stable contrib
apt-get update
signatures could not be verified NO_PUBKEY....
seemed to do something though.
apt-get install module-assistant wireless-tools
m-a a-i broadcom-sta
returned some dependency errors and suggested I ran apt-get -f install
who am I to argue?
apt-get -f install (seemed to do a lot)
tried the above commands again and it seemed to go further but didn't work.
here is the web page and info that I was referring to:
http://community.linuxmint.com/tutorial/view/218
METHOD 1
1. The Mint developers of LMDE have enabled the "non-free" repositories by default. To confirm this navigate to
If the "non-free" repository was not present, add it to to /etc/apt/sources.list Open the file with
Updated to reflect testing repositories instead of Squeeze repositories.
2. The remainder of the installation process will be performed as the root user in a terminal. Open a terminal, type su, press , type your password (there will be no response from the blinking cursor), press . The terminal prompt will change from something like username@computer-name ~ $ to computer-name username # Note: the change from $ to #. Also, to avoid confusion between a one (1) and lowercase L (l) commands can be copied from the tutorial and pasted into the terminal. The key combination to paste into the terminal is
3. Update the list of available packages. Install the module-assistant and wireless-tools packages:
4. Build and install a broadcom-sta-modules-* package for your system, using Module-Assistant:
5. Blacklist the brcm80211 module, to prevent it conflicting for support of BCM4313, BCM43224 and BCM43225 devices:
11. Exit the root terminal:
It all works OK except for the WiFi which at first was low in signal and would not accept my network password. Then it didn't work at all because the interface had been disabled.
A quick google revealed that it's a common problem with the broadcom driver.
Trial fix #1 was to install a package from the Debian repository and compile it.
I added two repositiries to the file /etc/apt/sources.list
first:
deb http://ftp.us.debian.org/debian testing main contrib non-free
and then:
deb http://ftp.au.debian.org/debian stable contrib
apt-get update
signatures could not be verified NO_PUBKEY....
seemed to do something though.
apt-get install module-assistant wireless-tools
m-a a-i broadcom-sta
returned some dependency errors and suggested I ran apt-get -f install
who am I to argue?
apt-get -f install (seemed to do a lot)
tried the above commands again and it seemed to go further but didn't work.
here is the web page and info that I was referring to:
http://community.linuxmint.com/tutorial/view/218
METHOD 1
1. The Mint developers of LMDE have enabled the "non-free" repositories by default. To confirm this navigate to
- Menu > Administration > Software Sources.
- Select the tab
If the "non-free" repository was not present, add it to to /etc/apt/sources.list Open the file with
gksudo gedit /etc/apt/sources.list
and add these lines at the end of the file
# Debian Testing (currently Wheezy)
deb http://ftp.us.debian.org/debian testing main contrib non-free
save and close.Updated to reflect testing repositories instead of Squeeze repositories.
2. The remainder of the installation process will be performed as the root user in a terminal. Open a terminal, type su, press , type your password (there will be no response from the blinking cursor), press . The terminal prompt will change from something like username@computer-name ~ $ to computer-name username # Note: the change from $ to #. Also, to avoid confusion between a one (1) and lowercase L (l) commands can be copied from the tutorial and pasted into the terminal. The key combination to paste into the terminal is
3. Update the list of available packages. Install the module-assistant and wireless-tools packages:
apt-get update
apt-get install module-assistant wireless-tools
4. Build and install a broadcom-sta-modules-* package for your system, using Module-Assistant:
m-a a-i broadcom-sta
The "a-i" stands for "auto-install," meaning "download the module source, compile it for the current kernel and install it".5. Blacklist the brcm80211 module, to prevent it conflicting for support of BCM4313, BCM43224 and BCM43225 devices:
echo blacklist brcm80211 >> /etc/modprobe.d/broadcom-sta-common.conf
6. Rebuild your initial ramdisk, to blacklist modules defined at /etc/modprobe.d/broadcom-sta-common.conf within initramfs:
update-initramfs -u -k $(uname -r)
7. Unload conflicting modules:
modprobe -r b44 b43 b43legacy ssb brcm80211
8. Load the wl module:
modprobe wl
9. Verify your device has an available interface:
iwconfig
10. Configure your wireless interface as appropriate.11. Exit the root terminal:
exit
Subscribe to:
Comments (Atom)